Control for Hybridisation/Non-specific Binding: This folder contains fluorescence images taken after immobilisation of non-complimentary ncDNA1 onto fluorous surfaces used for in Figure 1. This folder is then slip into 3 folders: Sample 1, 2, & 3 which refer to the 3 repeats. The images in each of these separate folders is taken from different areas in on the sample. 

Fluorous Crests: This folder contains the raw and processed data used for Figure 3. The raw data folder is split into 4 folders which are in numerical order and correspond to the immobilisation of FDNA1, washing off, immobilisation of FDNA2 and final wash. The images inside the folders are labelled by the area that they were taken from and the filter that was used. 

Fluorous Re-immobilisation: This folder contains fluorescence images taken during the removal/re-attachment experiment. The folder is then split into raw and processed data. In the raw data folder images that were taken during the experiment can be found. This folder is split into 10 sections all relating to which immobilisation step, or removal step, of FDNA1. All of these folders contains three sections ( one for each repeat) and then inside those folders contains the images taken from areas in that sample. 

QCM Data: QCM data for immobilisation and hybridisation of fluorous DNA onto flurous and non-fluorous QCM chip. This folder contains the raw and processed data. The raw data is spit into two folders relating to wether the QCM chip had been islamised using FDTS or not islamised. 

Supplimentary Info: This folder contains the data relating to the SI. This folder is separated into: 

1. Contact Angle: contains several images of contact angle measurements taken from fluorous and non-fluorous chips. 
2. Control of Background Fluorescence: This folder is split into 3 folders denoted by the filter used to image the FDTS surface with nDTS background. The images contained within these folders are from different samples. 
3. Denaturing Control: This folder contains fluorescence images taken after the immobilisation of the complimentary strand after washing the surface, but without the immobilisation of FDNA1. it is split up into three folders which contain the data obtained from different regions within the one sample. 
4. Photobleaching Control: This folder contains fluorescence images taken in tandem to fluorous re-immobilisation experiment. it is split up into three folders which contain the data obtained from different regions within the one sample.